1. Application:
The Baler is suitable to press the waste paper, PET bottle, plastic film, woven bag ,straw, sponge and zip-top can etc.
This machine is mainly used in the large super market, large and middle scope recycling stations and factories etc to press the loose materials into bales.
2.Technical Parameters:
![](/attachment/2017/07/75f4cb61a7.jpg)
![](/attachment/2017/07/ce5f272bb9.jpg)
![](/attachment/2017/07/2d6a2c429a.jpg)
3. Features:
Hydraulic cylinders adjust size of output opening, safe and stable; easy to change the bale density.
Integrative automatic control with PLC, button and touch screen, requiring less work labor.
Decentralized knifes increases much the cutting efficiency and reduces the machine load.
Duplex-stage wire pushing system, high efficiency and less space required for installation.
Automatic speed adjustment, increasing the production and decrease the consumption.
Pressure pre-set, overload protection, intelligent control and self-inspection program.
Independent emergency stop button to stop the machine at any time.
Auto micro-adjustment assembly method is used for hydraulic cylinders, reducing the torque and extending the service life.
4.Delivery: 30-45 days after receiving 30% deposite.
5.Service:
One year Guarantee and lifelong maintenance.
Dimension drawing and foundation drawing is available.
Engineers availabel to service and install the machine over 3-5 days.
Provide some professional training for operation and maintenance.
If any problems in running, we provide solutions in 12 hours.
6.Certification
![](/attachment/2017/07/05caf31277.jpg)
![](/attachment/2017/07/1924dec2a5.jpg)
![](/attachment/2017/07/cb74a600a7.jpg)
The Baler is suitable to press the waste paper, PET bottle, plastic film, woven bag ,straw, sponge and zip-top can etc.
This machine is mainly used in the large super market, large and middle scope recycling stations and factories etc to press the loose materials into bales.
2.Technical Parameters:
Pressure of cylinder | 60 tons | |
Main cylinder | YG180/120-1650 | Made by ourselves |
Push wire cylinder | YG80/50-560 | Made by ourselves |
Cut wire cylinder | YG80/50-50 | Made by ourselves |
Shrink cylinder | YG160/100-150 | Made by ourselves |
Bale size | W750×H850×L(500~1500)mm | The length can be adjusted |
Feed opening size | 1250×670 mm(L×W) | |
Cycle time | 16 s | Unload |
Pressure of hydraulic system | 18MPA | |
Throughput | 2~4 tons/h | |
Main motor power | 30 KW / 40 HP | Speed of revolution1440 r / min |
Cut wire motor power | 1.5KW / 2HP | Speed of revolution 1440 r / min |
Cooling motor power | 2.2KW/3HP | Speed of revolution 1440 r / min |
Main hydraulic pump | PVL23-75-125 | Displacement 200 ml / r |
Cooling hydraulic pump | CB-B80 | |
Strapping mode | Full automatic | |
Number of belting | 4 lines | |
Wire size | ∮ 2.6 mm | |
Feeding device | Conveyor or wind pipe | |
Bale out | Out continuously | |
Operation mode | Full automatic | Push button + touch screen |
Voltage | 3P-200V/220V/380V/400V/415V-50/60Hz | The voltage can be customized |
Control voltage | DC24V | |
Cooling mode | Air cooling AH1470T-200L | |
Oil reservoir | 950 L | |
Oil | L-HM 46 | Ambient temperature 0~30 ºC |
Machine overall dimension | 6800mm×3000mm×2150mm(L×W×H) | Without conveyor |
Machine weight | 9000 kg | |
Conveyor width | 1.5 meters | |
Conveyor length | 8 meters | |
Conveyor power | 7.8KW | |
Conveyor weight | 3.2 tons |
![](/attachment/2017/07/75f4cb61a7.jpg)
![](/attachment/2017/07/ce5f272bb9.jpg)
![](/attachment/2017/07/2d6a2c429a.jpg)
3. Features:
Hydraulic cylinders adjust size of output opening, safe and stable; easy to change the bale density.
Integrative automatic control with PLC, button and touch screen, requiring less work labor.
Decentralized knifes increases much the cutting efficiency and reduces the machine load.
Duplex-stage wire pushing system, high efficiency and less space required for installation.
Automatic speed adjustment, increasing the production and decrease the consumption.
Pressure pre-set, overload protection, intelligent control and self-inspection program.
Independent emergency stop button to stop the machine at any time.
Auto micro-adjustment assembly method is used for hydraulic cylinders, reducing the torque and extending the service life.
4.Delivery: 30-45 days after receiving 30% deposite.
5.Service:
One year Guarantee and lifelong maintenance.
Dimension drawing and foundation drawing is available.
Engineers availabel to service and install the machine over 3-5 days.
Provide some professional training for operation and maintenance.
If any problems in running, we provide solutions in 12 hours.
6.Certification
![](/attachment/2017/07/05caf31277.jpg)
![](/attachment/2017/07/1924dec2a5.jpg)
![](/attachment/2017/07/cb74a600a7.jpg)